The brass angle valve basin faucet produced by Chinese faucet factories is a high-quality plumbing connection device widely used in homes and commercial places. Made of brass and treated with anti-corrosion surface, this angle valve ensures long-term use without rust and corrosion. This article will detail how to properly install a brass angle valve basin faucet to ensure its normal use and extend its service life.
1. Preparation
Before installation, ensure all tools and materials are ready. Tools you need include wrenches, screwdrivers, sealing tape, etc. Additionally, check if the sizes of the angle valve and water pipe match, and ensure there is no damage or defects.
2. Installation Steps
Step 1: Turn Off the Water Supply
Before starting the installation, make sure to turn off the water supply to prevent water flow from causing unnecessary trouble.
Step 2: Clean the Water Pipe Interface
Use a clean cloth to clean the interface of the water pipe, ensuring there are no impurities and dirt to guarantee a good seal.
Step 3: Install the Angle Valve
Align the brass angle valve basin faucet with the water pipe interface and gently tighten it by hand. Then use a wrench to further tighten it, but do not over-tighten to avoid damaging the threads.
Step 4: Sealing Treatment
Wrap several rounds of sealing tape around the threaded part of the angle valve to enhance the sealing effect and prevent leaks.
Step 5: Connect the Water Pipe
Connect the water pipe to the outlet of the angle valve, ensuring the connection is tight and secure. Use a wrench to tighten appropriately, but again avoid over-tightening.
Step 6: Check for Leaks
Turn on the water supply and check for leaks at the connection points of the angle valve and water pipe. If there are leaks, immediately turn off the water supply and recheck the sealing.
3. Regular Maintenance
To ensure the long-term normal use of the brass angle valve basin faucet, it is recommended to regularly check the connection points of the water pipe and valve to ensure there is no looseness or leakage. If any issues are found, they should be addressed promptly.
4. Precautions
- Ensure a tight seal during installation to avoid water flow issues or leaks.
- Regularly check the connection points of the water pipe and valve to ensure there is no looseness or leakage.
- If the angle valve malfunctions, it is recommended to contact a professional for repair or replacement.
By following the above steps, you can correctly install a brass angle valve basin faucet, ensuring its normal use and extending its service life. The brass angle valves produced by Chinese faucet factories, with their high quality and durability, are an ideal choice for homes and commercial places.
