The conceal wall mounted shower set has become a popular choice in modern bathroom design due to its clean aesthetic and advanced functionality. However, since it features a hidden installation structure, the setup requires careful planning and professional handling. This guide outlines the installation process and key maintenance tips for your conceal wall mounted shower set.
1. Pre-Installation Notice
Before starting, ensure that the bathroom wall is suitable for grooving, such as concrete or brick. Confirm that the plumbing layout matches the product requirements, and the wall depth allows for embedded valve installation. Review the product manual to understand the component structure.
2. Required Tools
Tools include a drill, wall cutter, level, adjustable wrench, pipe wrench, screwdriver, sealant, measuring tape, wall plugs, and expansion bolts.
3. Preparation Steps
-
Mark the positions of the valve, overhead shower, handheld unit, and water outlet according to the product layout.
-
Groove the wall and clean away dust.
-
Embed the valve body and piping, ensuring correct alignment.
-
Perform a preliminary water test before closing the wall.
4. Standard Installation Procedure
-
Install the valve body into the groove at the appropriate depth so that the panel will be flush with the wall surface.
-
Connect pipes from the valve to the overhead and handheld showers, sealing with tape or glue.
-
Close and finish the wall surface.
-
Mount the control panel, overhead shower, and handheld unit, adjusting angles and positions.
-
Clean the area and prepare for testing.
5. Function Testing and Inspection
After turning on the water supply, test hot/cold switching and temperature control. Check for leaks or unusual flow. Confirm that all connections are firm and sealed.
6. Common Issues and Solutions
-
Misaligned flow: Adjust the shower bracket angle.
-
Thermostat failure: Check for balanced water pressure or replace the thermostatic core.
-
Wall leakage: Reapply sealing or reinforce waterproofing.
7. Safety Tips and Maintenance Advice
-
Shut off the main water valve during installation and keep the area dry.
-
Avoid disassembling the internal components without professional guidance.
-
Clean filters regularly to prevent blockage.
-
Inspect the valve every six months to maintain system stability.
Chinese faucet factories offer conceal wall mounted shower sets made from premium brass and stainless steel, with high-precision craftsmanship and modern designs. Factories provide technical drawings, remote guidance, and after-sales services to support customers in smooth installation and long-term use.
