Complete Installation Guide for Brass Concealed Fausets Shower Set

The brass concealed fausets shower set is a premium bathroom fixture widely used in modern homes, luxury hotels, and high-end apartments. To ensure proper function and long-term reliability, correct installation is critical. This guide outlines essential steps and tips from China faucet factory practices.

1. Pre-Installation Notes

Before installing the brass concealed fausets shower set, confirm that the wall structure can support in-wall pipe embedding. A minimum wall thickness of 8 cm is recommended. Plumbing and electrical planning should be done early to ensure accurate placement of hot and cold water inlets.

2. Required Installation Tools

Tools include a rotary hammer, level ruler, wrench, screwdriver, sealant, measuring tape, wall bracket, waterproof tape, and expansion bolts. Some products include positioning templates to assist installation.

3. Preparation Steps

1. Check that all components are complete (thermostatic valve, showerheads, outlet pipe, control panel, etc.);

2. Ensure water pressure is within acceptable range;

3. Clean wall surface and mark installation points;

4. Pre-install water inlets and conduct pressure testing to prevent leaks.

4. Standard Installation Process

1. Cut wall grooves and embed hot/cold water pipes according to the layout;

2. Install the mixing valve and fix it with bolts inside the wall;

3. Connect piping to the overhead shower, handheld shower, and outlets;

4. Apply waterproofing and complete wall tiling;

5. Install control panel and outlets, ensuring all joints are sealed;

6. After drying, connect water supply and test functionality.

5. Testing and Key Checkpoints

Turn on the water and test each outlet for proper function. Check if the panel switches water modes smoothly and if the thermostat reacts accurately. Use a thermometer to ensure actual temperature matches the set value.

6. Common Installation Issues and Solutions

• Low water flow: Likely due to clogged pipes or filters—clean thoroughly.

• Thermostat malfunction: Check if hot/cold pipes are reversed or if water pressure is unbalanced.

• Control panel issues: Ensure correct installation and check for loose wiring or misaligned mechanical parts.

7. Safety and Maintenance Tips

Regularly inspect joints and the valve body for leaks. Avoid using acidic cleaners on surfaces. Chinese faucet factories recommend yearly professional maintenance to ensure product longevity and safety.

The brass concealed fausets shower set is not only functional but adds a refined, minimalist aesthetic to any bathroom. Products from China faucet factories offer durability, customization, and excellent support, making them a preferred choice for both residential and commercial projects.