مصنع صنبور الصين | اتصل بـ +86 13760770781 | Email:sales72@yoroow.com
الصين مصنع صنبور الصين من صنابير الحمام، صنابير المطبخ
الاستحمام منذ عام 2013
مصنع Yoroow Faucet Faucet Factory هي شركة مبتكرة مكرسة لتصنيع الحنفيات، وتركز على تصنيع منتجات الأدوات الصحية عالية الجودة والفعالة من حيث التكلفة، مثل الحنفيات والدش والمرنة الخراطيم، إلخ. خلال الـ 12 سنة الماضية بعد YOROOW
إذا كنت ماركة صنبور
سلسلة مواد بناء
أو سوبر ماركت، أو شركة
شركة هندسية، و
تحتاج إلى شراء صنبور
منتجات أو تطوير صنبور
قوالب، YOROOW هو
خيارك الأول.
The thermostatic shower set concealed, with its beautiful appearance, practical functions, and safety features, has become an ideal choice for high-end bathrooms. Its concealed installation design perfectly embeds the pipes and mixing valves into the wall, only exposing the delicate showerhead and control panel. This not only optimizes the bathroom space layout but also gives the space a simple and elegant aesthetic. The equipped thermostatic control valve can automatically adjust the water temperature, avoiding sudden changes in water temperature, providing a comfortable and stable bathing experience, and effectively reducing the risk of scalding. The thermostatic shower set concealed produced by مصانع الحنفيات الصينية is made of high-quality brass or stainless steel, strictly following international standards, and offers a wide variety of styles and surface treatment options to meet the personalized needs of different consumers. Before enjoying the comfortable experience it brings, correct installation is crucial. The following is a detailed installation guide.
I. Precautions Before Product Installation
Before installing the thermostatic shower set concealed, it is necessary to confirm whether the bathroom wall structure is suitable for concealed installation. The wall needs to have sufficient thickness and load-bearing capacity. Usually, brick walls or concrete walls are more suitable, while hollow walls may not be able to bear the weight of the set and water pressure. At the same time, understand the home water supply system, including the water pressure and water quality. If the water pressure is too low or the water quality is poor, it may be necessary to install additional booster equipment or water filtration devices to ensure the normal operation of the shower set. In addition, carefully read the product manual provided by the Chinese faucet factory, understand the product features and installation requirements, and clarify the functions and installation positions of each component.
II. Required Installation Tools
The following tools are required for installing the thermostatic shower set concealed: electric drill, wrench, spirit level, tape measure, PTFE tape, sealant, pipe wrench, etc. The electric drill is used to drill holes in the wall; the wrench and pipe wrench are used to tighten or remove pipe fittings; the spirit level ensures the installation position is horizontal; the tape measure is used for measuring dimensions; PTFE tape and sealant are used to seal the joints to prevent water leakage.
III. Preparation Steps Before Installation
First, turn off the main water valve at home and empty the remaining water in the pipes to avoid water spraying during the installation process. Then, according to the product manual and the actual layout of the bathroom, mark the installation positions on the wall, including the installation points of the mixing valve, showerhead, and control panel, to ensure that the positions of each component are accurate and the height is appropriate. Next, use a tape measure to measure the distance between the marked points and confirm again whether it meets the installation requirements. Finally, neatly arrange the required installation components and tools to prepare for installation.
رابعاً. عملية التثبيت القياسية
1.Drilling Holes in the Wall: Use an electric drill to drill holes in the wall according to the marked positions. The depth and diameter of the holes need to meet the product installation requirements. Pay attention to keeping the wall clean during the drilling process and clean up the debris in time.
2.Installing Embedded Parts: Embed the embedded parts of the mixing valve into the drilled holes. Use a spirit level to calibrate to ensure that the embedded parts are horizontal and vertical. Then fix them with cement or special fixing agents and wait for them to dry and set firmly.
3.Connecting Water Pipes: Connect the cold and hot water pipes to the interfaces of the embedded parts. Wrap an appropriate amount of PTFE tape during the connection to ensure that the joints are sealed and do not leak. Use a pipe wrench to tighten the pipe fittings, and pay attention to the appropriate force to avoid damaging the pipe fittings.
4.Installing the Mixing Valve and Control Panel: Install the mixing valve on the embedded parts and fix the screws to ensure a firm installation. Then install the control panel, connect the lines, and ensure that the control panel operates flexibly and displays normally.
5.Installing the Showerhead: According to different types of showerheads, choose the appropriate installation method and fix the showerhead on the wall to ensure a stable installation and a suitable angle.
V. Usage Testing and Inspection Key Points
After the installation is completed, turn on the main water valve and check whether there is any water leakage at each joint. You can wipe the joints with a tissue or dry cloth and observe whether there are water stains. Test the function of the thermostatic control valve, adjust the water temperature, and check whether the water temperature can be stabilized at the set temperature and the heating and cooling reactions are sensitive. At the same time, test whether the water output of the showerhead is uniform and whether the water flow meets the requirements.
VI. Common Installation Problems and Solutions
If there is water leakage at the joint, it may be due to insufficient winding of PTFE tape or loose pipe fittings. You can rewind the PTFE tape and tighten the pipe fittings. If the thermostatic function fails, it may be due to incorrect wiring or a faulty valve core. Check the wiring connection and contact the after-sales personnel of the Chinese faucet factory for maintenance or replacement of the valve core.
VII. Safety Tips and Maintenance Suggestions
During the installation and use process, ensure that the power and water are turned off to avoid dangers such as electric shock and water leakage. Regularly clean and maintain the shower set, wipe the surface with a soft cloth, and avoid using corrosive cleaning agents. Check whether there are any looseness or water leakage at the joints every once in a while, and deal with the problems in time to extend the service life of the product.
