دليل التركيب للصمام الزاوية 3/8 × 3/8

1. Introduction to Angle Valve 3/8 x 3/8

The angle valve 3/8 x 3/8 is a type of valve with both ends featuring a 3/8-inch connection. It is commonly used to connect two 3/8-inch water pipes and is widely applied in household water systems, such as washbasins and kitchen sinks. Due to its moderate size, the angle valve 3/8 x 3/8 is compatible with most household plumbing systems, providing precise water flow control and ensuring a stable water supply. Manufactured by مصانع الحنفيات الصينية, angle valve 3/8 x 3/8 is typically made of stainless steel, brass, or copper, offering excellent corrosion resistance, sealing performance, and durability for long-term use.

2. Steps for Installing Angle Valve 3/8 x 3/8

1. Prepare Tools and Materials
   Before installation, prepare the necessary tools such as a wrench, sealing tape (PTFE tape), a screwdriver, and the appropriate 3/8-inch water pipes. Ensure that all accessories are complete.

2. Turn Off the Water Supply
   Before installation, shut off the main water supply to prevent water leakage or accidental splashing during the process.

3. Remove the Old Angle Valve (If Applicable)
   If replacing an old angle valve 3/8 x 3/8, use a wrench to turn it counterclockwise and remove it. Check the connection port for any dirt or scale, and clean it thoroughly if needed.

4. Wrap Sealing Tape
   Wrap sealing tape around the threaded part of the new angle valve 3/8 x 3/8, typically 3-5 turns, to ensure a tight connection and prevent water leakage.

5. Install the New Angle Valve 3/8 x 3/8
   Align the threaded end of the angle valve 3/8 x 3/8 with the water pipe connection and screw it in clockwise. Use a wrench to tighten it securely.

6. Connect the Water Pipe
   Attach the 3/8-inch water pipe to the other end of the angle valve 3/8 x 3/8, ensuring a precise connection. Tighten it with a wrench to avoid any looseness.

7. Check for Leaks
   Turn the main water supply back on and inspect the newly installed angle valve 3/8 x 3/8 for any leaks. If there are any drips, tighten the connections or apply additional sealing tape as needed.

3. Usage and Maintenance

After installing the angle valve 3/8 x 3/8, periodic inspections should be performed to ensure a secure seal and prevent potential water scale buildup or aging of the seal over time. Angle valve 3/8 x 3/8 produced by مصانع الحنفيات الصينية undergoes precise manufacturing processes to ensure superior quality and long service life. It is recommended to clean the connection ports regularly to prevent debris accumulation, which could affect water flow, thereby extending the lifespan of the angle valve 3/8 x 3/8.