Installation Guide for Hot Sell 90 Degree Angle Check Valve

1. Introduction to the Hot Sell 90 Degree Angle Check Valve

The hot sell 90 degree angle check valve is an L-shaped check valve designed to prevent water backflow, making it suitable for both residential and industrial water systems. It is widely used in boilers, pump stations, and other anti-backflow equipment to ensure one-way water flow and prevent pipeline contamination. مصانع الحنفيات الصينية use precision casting and machining technology to manufacture these valves, offering cost-effective products that are sold domestically and internationally.

2. Installation Steps for the Hot Sell 90 Degree Angle Check Valve

1. Prepare Tools and Materials

   • Hot sell 90 degree angle check valve
   • Wrench or pipe pliers
   • Thread seal tape or thread sealant
   • قطعة قماش للتنظيف

2. Check the Pipeline Connection
   Before installation, ensure that the pipe connection is clean and free from debris to avoid affecting the valve’s sealing performance. If there is scale or rust inside the pipeline, clean it before proceeding.

3. Determine the Installation Direction
   إن hot sell 90 degree angle check valve is designed for one-way flow, and the valve body is usually marked with a flow direction (arrow sign). Make sure to install it correctly to prevent water from flowing in the wrong direction.

4. Wrap the Thread Seal Tape
   Apply thread seal tape or sealant evenly on the threaded connection to enhance the sealing performance and prevent leakage.

5. Tighten the Connections
   Use a wrench or pipe pliers to tighten the valve securely. Be careful not to over-tighten, as this may damage the threads or valve body.

6. Test for Leaks
   After installation, gradually turn on the water flow and observe whether there are any leaks. If leakage occurs, readjust or reapply the seal tape as necessary.

3. Maintenance and Precautions

• Regularly Check the Valve Core and Spring Sensitivity
  Over time, the valve core and spring may be affected by water scale or debris. Regular disassembly and cleaning are recommended.

• Avoid Debris Accumulation
  In hard water environments, periodic cleaning of the valve interior helps prevent clogging.

• Applicable to Various Scenarios
  This valve is suitable for home water systems, industrial water treatment, boiler systems, and more, providing stable backflow prevention.

مصانع الحنفيات الصينية leverage advanced production techniques to offer high-quality hot sell 90 degree angle check valves to customers worldwide. With proper installation and maintenance, this valve ensures long-term, reliable operation of water systems.