The Brass Hot Cold Water Mixer Concealed Shower Set features premium brass construction, integrating a thermostatic mixing valve, overhead showerhead, handheld showerhead, and other components. Concealed installation design optimizes bathroom space. Manufactured by Chinese faucet factories with precision craftsmanship, this set ensures corrosion resistance, anti-leakage performance, and suitability for home and luxury hotel applications. The detailed installation guide is as follows:
I. Pre-installation NotesCheck Accessories:
1.Check Accessories: Verify the package contains concealed mixing valve body, shower components, connecting pipes, fasteners, and manual.
2.Confirm Pipe Layout: Ensure the distance between hot and cold pipes (14-16cm) and the depth of the embedded box match requirements to avoid misalignment.
3.Environment Check: Ensure the wall is flat and dry, with pre-installed power outlets if LED features are included.
II. Required Tools
Impact drill, screwdriver, wrench, level gauge, sealant, Teflon tape, silicone gun, tape measure, electrical tools (if needed).
III. Preparation StepsEmbedding Box Installation:
1.Embedding Box Installation:Chisel a wallto create a recessed slot, install the embedded box
and ensure it is horizontal.
2.Pipe Cleaning: Clear debris from pipe joints to prevent valve core blockage.
3.Sealing Protection: Wrap Teflon tape around threads for enhanced sealing.
IV. Standard Installation ProcessFix the Valve:
1.Fix the Valve: Embed the valve body into the embedded boxand tighten screws to align with the wall surface.
2.Connect Pipes: Identify hot/cold pipes (red/blue markings) and secure joints with a wrench, avoiding over-tightening.
3.Install Shower Components: Mount the overhead bracket, handheld shower rod, and faucet in vertical and horizontal positions.
4.Adjust the Valve: Rotate the temperature knob to the middle position and test water flow.
V. Testing and InspectionWater Flow Test:
1.Water Flow Test: Turn on both pipes to check smooth flow and no dripping from showerheads.
2.Temperature Adjustment: Switch between hot/cold water to verify the valve’s sensitivity.
3.Seal Check: Wipe joints with a tissue to confirm no leaks.
VI. Common Issues and SolutionsUneven Water:
1.Uneven Water: Clean nozzle blockages with a soft brush.
2.Temperature Fluctuation: Adjust the valve’s flow limiter or contact after-sales service.
3.Looseness: Tighten screws or add gaskets for stability.
VII. Safety Tips and Maintenance
1.Safety:Do not modify circuits (for smart versions) and regular checking pipe connections.
2.Maintenance:Wipe the surface with a soft cloth, avoid acid cleaners, and check valve seals quarterly.
3.Warranty:Keep the purchase receipt for official after-sales support from Chinese faucet factories.
Crafted with Chinese manufacturing excellence for quality assurance.