The concealed shower faucet set is an ideal option for high-end bathroom renovations, featuring sleek design and seamless wall-embedded installation. The set typically includes a concealed mixing valve, overhead showerhead, handheld showerhead, and water control panel, with all pipes hidden within the walls. Manufactured by Chinese faucet factories using durable brass or stainless steel, some models offer intelligent thermostatic control for stable water temperature, suitable for both residential and commercial use.
Installation Steps and Key Points
Ⅰ Pre-Installation Checklist
1.Verify the product model matches your bathroom space and check the accessory list (valve body, showerheads, control panel, connectors, etc.).
2.Ensure wall structure supports pipe embedding and avoid drilling into load-bearing walls.
3.Professional installation is recommended to meet safety standards.
Ⅱ Required Tools
Screwdriver, wrench, spirit level, electric drill, chiseling tools, sealant, pipe pressure tester, etc.
Ⅲ Preparation Steps
1.Shut off the main water valve and drain residual water.
2.Measure and mark pipe embedding locations according to the manual.
3.Check embedded pipeline
joints for leaks before installation.
Ⅳ Standard Installation Procedure
1.Embed pipes: Cut grooves in the wall, maintain ≥15cm spacing between hot and cold pipes, and secure them firmly.
2.Install valve body: Embed the mixing valve into the wall, connect hot/cold water inlets, and seal gaps with adhesive.
3.Connect shower components: Mount the overhead bracket, handheld hose, and control panel in sequence.
4.Commissioning: Turn on the main valve, check all outlets for smooth flow and leaks.
ⅤUsage Testing and Inspection
1.Test the switching between overhead and handheld showerheads.
2.Calibrate thermostatic models to ensure ±2°C temperature deviation.
3.Periodically check seals after prolonged use.
Ⅵ Common Issues and Solutions
●Leakage: Inspect seals or replace O-rings.
●Unstable temperature: Check the thermostat or adjust water pressure.
●Low flow: Clean pipes or replace filters.
Ⅶ Safety Tips and Maintenance Advice
1.Avoid hard impacts and clean the faucet regularly with a soft cloth.
2.Turn off the main valve during long-term absence to prevent freezing.
3.Schedule professional maintenance every 6 months.
