Fabric 180gsm is a medium-weight industrial fabric produced by a Chinese faucet factory, well-known for its excellent strength and abrasion resistance, commonly used for manufacturing packaging bags and coverings. Before installing Fabric 180gsm, ensure that the installation surface is clean and flat.
Essential tools for installation include a measuring tape, utility knife, industrial adhesive or glue, and a compaction roller
For preparation steps, measure the dimensions of the area intended for covering, and cut the Fabric 180gsm precisely according to these measurements, ensuring neat and straight edges. The installation surface must be clean, oil-free, dust-free, and dry to ensure effective adhesion.
During the standard installation process, place the pre-cut Fabric 180gsm fabric onto the designated surface, evenly apply industrial adhesive or glue to the back side, carefully lay the fabric down, and use a compaction roller to evenly press it into place, eliminating air bubbles and wrinkles.
After installation, carry out usage tests and inspections focusing on ensuring firm adhesion at the fabric edges, confirming the surface is smooth without noticeable bulges or bubbles.
Common installation issues include bubbling of the fabric, movement before adhesive drying, or inaccurate cutting sizes. Solutions include re-rolling to remove air bubbles, allowing sufficient drying time, and precise measurement and cutting prior to installation.
Safety and maintenance tips include ensuring good ventilation during installation to avoid prolonged inhalation of industrial adhesive vapors. Regularly inspect the fabric for signs of wear, promptly repairing or replacing damaged areas to extend the lifespan and maximize the advantages of high-quality production from the Chinese faucet factory.
English 
Arabic 
Dutch 
French 
German 
Italian 
Portuguese 
Russian 
Spanish