The brass angle stop valve produced by Chinese faucet factories is an essential component in pipeline systems, primarily used to regulate or stop water flow. It connects water pipes and sanitary fixtures, ensuring a quick water shutoff during maintenance. This article provides a detailed guide on the installation steps and maintenance tips for brass angle stop valves, helping you ensure their long-term stable operation.
1. Installation Steps for Brass Angle Stop Valve
- Preparation
Before installation, ensure all tools and materials are ready, including wrenches, Teflon tape, and pipe cutters. Inspect the brass angle stop valve for any damage or defects. - Turn Off Water Supply
Always shut off the main water supply before installation to prevent water leakage during the process. - Cut the Pipe
Use a pipe cutter to cut the pipe to the appropriate length, ensuring a smooth cut and avoiding burrs. - Wrap Teflon Tape
Wrap Teflon tape clockwise around the pipe threads, typically 10-15 turns, to enhance sealing. - Install the Valve
Align the brass angle stop valve with the pipe threads and hand-tighten it clockwise for initial fixation. Then use a wrench to further tighten it, but avoid excessive force to prevent thread damage. - Check for Leaks
After installation, slowly turn on the water supply and check for leaks at the valve connection. If leaks occur, re-tighten or replace the Teflon tape.
2. Maintenance Tips for Brass Angle Stop Valve
- Regular Inspection
Inspect the valve’s sealing every six months or annually, especially if it has not been used for a long time. Check if the valve operates smoothly and look for signs of aging or wear. - Clean Debris
If water flow decreases or the valve becomes stiff, debris may have accumulated inside. Disassemble the valve and clean the interior. - Replace Worn Parts
If the valve’s sealing ring or core shows signs of aging or damage, replace it promptly to prevent leaks or functional failure. - Avoid Excessive Force
When operating the valve, avoid using excessive force to prevent damage to the valve core or threads.
3. Advantages of Chinese Faucet Factories
Chinese faucet factories are renowned for their high-quality brass angle stop valves. The products are made of premium brass materials, offering corrosion resistance, high-temperature tolerance, and long service life. The factories strictly adhere to international standards, ensuring each product undergoes multiple inspections to meet customer needs.
