Installation Guide for 1/2″ x 1/4″ 1/4 Turn Angle Stop Valve (Chrome)

ntroduction
The 1/2″ x 1/4″ 1/4 Turn Angle Stop Valve (Chrome) is an important component in household and commercial plumbing systems and is widely used to connect and control faucets, sinks, and other water-using devices. It has a chrome-plated surface treatment, which has beautiful corrosion resistance, while the 1/4 rotation design makes the switch simpler, reducing the complexity of repair and maintenance. The product is carefully manufactured by Chinese faucet factories to ensure that it meets the high standards of the global market and provides high-quality, durable water flow control solutions.

Preparation before installation
Before installing the 1/2″ x 1/4″ 1/4 Turn Angle Stop Valve (Chrome), make the following preparations:

Tool preparation

wrench
screwdriver
Raw material tape or pipe sealant
Cleaning cloth
Shut off the main water source

Be sure to Turn off the main water source before installing the 1/2″ x 1/4″ 1/4 Turn Angle Stop Valve (Chrome) to avoid leaks during installation.
Check pipe connection

Ensure that the water pipe interface is clean and free of impurities. If there is rust or residue, wipe it with a dry cloth to ensure good sealing performance.
Installation procedure
Remove old valves (if applicable)

To replace the old valve, use a wrench to turn the old valve counterclockwise and remove it from the water pipe connector.
Remove residual sealing material from pipe interfaces to ensure that the new 1/2″ x 1/4″ 1/4 Turn Angle Stop Valve (Chrome) is installed correctly.
Wrap raw material tape

Wrap the raw material belt evenly around the pipe thread part to improve the sealing effect and prevent water leakage.
Install 1/2″ x 1/4″ 1/4 Turn Angle Stop Valve (Chrome)

Turn the new valve clockwise into the pipe interface and tighten it gently with a wrench, but do not overexert, so as not to damage the thread or cause the valve to deform.
Connecting water equipment

Connect the 1/4″ end of the 1/2″ x 1/4″ 1/4 Turn Angle Stop Valve (Chrome) to a faucet or other water-using device, making sure the connector is tight and not loose.
Turn on the main water source and test

Turn on the main water source and slowly turn the 1/2″ x 1/4″ 1/4 Turn Angle Stop Valve (Chrome) to check that it opens and closes smoothly.
Observe whether there is leakage at the interface, if there is leakage, you can adjust the seal or add raw material belt.
Care and maintenance
Periodic inspection

Check the seal and operating fluency of the 1/2″ x 1/4″ 1/4 Turn Angle Stop Valve (Chrome) every 6 months to ensure there are no leaks or looseness.
Clean the chrome surface

Since the 1/2″ x 1/4″ 1/4 Turn Angle Stop Valve (Chrome) uses a chrome plating process, the surface can be wiped with a dry cloth during daily cleaning to maintain a bright appearance and avoid scale buildup.
Avoid overexertion

The 1/4 rotation design makes the switch more convenient, without excessive force, to avoid damage to the internal structure.
China faucet factory quality assurance
The 1/2″ x 1/4″ 1/4 Turn Angle Stop Valve (Chrome) is manufactured by China Faucet Factory with advanced production technology and strict quality control to ensure that each valve has excellent sealing, durability and ease of operation. The product meets the quality standards of the international market and is suitable for domestic and commercial projects, providing efficient and reliable water flow control solutions.