1. Product Introduction
The 90° Degrees Aluminum Motorcycle Tubeless Valve is made of lightweight aluminum alloy and is designed for tubeless motorcycle tires. The 90-degree angle design makes valve operation easier, especially in motorcycles with limited wheel rim space. This valve facilitates efficient inflation and deflation, helping to maintain optimal tire pressure and enhance riding safety.
With extensive manufacturing expertise, Chinese faucet factories produce high-quality 90° Degrees Aluminum Motorcycle Tubeless Valve, ensuring excellent sealing and durability. These valves provide reliable solutions for motorcycle riders worldwide.
2. Installation Steps
1. Tools and Materials Preparation
- 90° Degrees Aluminum Motorcycle Tubeless Valve
- Tire removal tools
- Torque wrench
- Lubricant (recommended: tire-specific lubricant)
2. Removing the Old Valve
- Use tire tools to gently loosen the tire edge to facilitate valve replacement.
- Remove the old valve stem with a wrench or specialized tool, taking care not to damage the wheel rim.
3. Installing the New Valve
- Apply a small amount of lubricant to the base of the 90° Degrees Aluminum Motorcycle Tubeless Valve for smoother installation.
- Insert the valve into the designated valve hole from the inner side of the wheel rim, ensuring the correct 90-degree orientation.
- Hand-tighten the valve nut and use a torque wrench to secure it to the recommended torque value for optimal sealing.
4. Inflation and Testing
- Inflate the tire to the recommended pressure using an air pump or compressor.
- Check for air leaks by applying soapy water around the valve; bubbles indicate a leak.
- If no leaks are found, the installation is complete.
3. Important Considerations
- Ensure the 90° Degrees Aluminum Motorcycle Tubeless Valve size is compatible with the motorcycle wheel rim.
- Avoid over-tightening the valve to prevent damage and ensure proper sealing.
- Regularly inspect the valve to ensure it functions correctly and prevent air leakage due to wear or aging.
