Installation Guide for Angled Ball Valve 1/4

The angled ball valve 1/4 is a crucial component widely used in small pipeline systems, especially in applications such as kitchen equipment and washing machines. This type of valve controls water flow by rotating a ball, offering high precision in water flow control and excellent sealing performance. Angled ball valves 1/4 produced by Chinese faucet factories are renowned for their efficient water flow regulation and precise sealing, making them an ideal choice for small devices and precise water pipe systems.

Preparation Before Installation

Before installing the angled ball valve 1/4, ensure that all tools and materials are ready. Commonly required tools include wrenches, screwdrivers, and pipe cutters. Additionally, check the size and type of the pipeline system to ensure compatibility with the angled ball valve 1/4.

Installation Steps

Turn Off the Water Supply: Before installation, make sure to turn off the water supply to prevent water leakage and equipment damage.

Cut the Pipe: Use a pipe cutter to cut the pipe where the angled ball valve 1/4 will be installed to the appropriate length. Ensure the cut surface is smooth for subsequent connections.

Clean the Pipe: Use a cleaning cloth or sandpaper to clean the cut surface of the pipe, removing burrs and impurities to ensure a smooth and even connection.

Install the Valve: Connect the threaded end of the angled ball valve 1/4 to the pipe and tighten it with a wrench. Be careful not to overtighten to avoid damaging the threads.

Connect the Device: Connect the other end of the angled ball valve 1/4 to the device that needs to be controlled (e.g., washing machine, kitchen equipment) and tighten it with a wrench.

Check for Leaks: Turn on the water supply and check for leaks at the connection points of the angled ball valve 1/4. If there are leaks, retighten or replace the sealing gasket.

Test the Function: Rotate the ball of the angled ball valve 1/4 to test its water flow control function, ensuring it can open and close properly.

Precautions

During installation, always follow operational guidelines to avoid equipment damage or personal injury due to improper operation.

Regularly inspect the sealing performance of the angled ball valve 1/4 and replace any aging or damaged sealing gaskets promptly to ensure long-term stable operation.

By following these steps, you can easily complete the installation of the angled ball valve 1/4. Angled ball valves 1/4 produced by Chinese faucet factories, with their exceptional performance and reliability, provide efficient water flow control and precise sealing for your pipeline system.