Product Introduction
The brass angle valve with check valve produced by the Chinese faucet factory is made of high-quality brass, offering excellent corrosion resistance and oxidation resistance. The check valve design effectively prevents backflow, ensuring that water flows in one direction, thus avoiding contamination of drinking water pipes by wastewater. These valves are widely used in water pipe systems requiring one-way flow, such as kitchens and bathrooms.
Installation Steps
- Prepare Tools
- Adjustable wrench
- PTFE tape (Teflon tape)
- Pipe wrench
- Check Accessories Ensure all parts of the brass angle valve with check valve are intact, including threaded connections and check valve components.
- Connect the Pipe
- Wrap PTFE tape around the valve threads to enhance the seal.
- Align the valve’s inlet with the water pipe and tighten using the adjustable wrench.
- Confirm Check Valve Direction
- Ensure the arrow mark on the check valve aligns with the direction of water flow.
- Connect the Outlet
- Attach the outlet to the water appliance (such as a toilet or sink) and secure the connection.
- Test for Leaks
- Turn on the water supply and check all joints for any leaks.
Routine Maintenance
- Regularly Check the Check Valve: Test the valve’s sensitivity to prevent malfunction due to water accumulation or debris.
- Keep Clean: Wipe the brass surface regularly to prevent scale buildup that may affect its appearance and performance.
