Installation Guide for Brass Craft Angle Stop Additional Three-Way Valve

The brass craft angle stop additional three-way valve is a valve that supports multi-device water supply connections, making it suitable for complex pipeline layouts. Its multiple interface design offers greater flexibility during maintenance, allowing individual water flows to be easily shut off. Chinese faucet factories’ advanced technology ensures that the brass craft angle stop additional three-way valve is leak-free and highly durable, particularly suited for the multifunctional demands of the global market. To ensure the correct installation and use of the brass craft angle stop additional three-way valve, here are detailed installation steps and precautions.

1. Preparation

Before installing the brass craft angle stop additional three-way valve, ensure all tools and materials are ready. Required tools include a wrench, Teflon tape (sealant tape), and a pipe cutter (if necessary). Additionally, turn off the water supply and drain any residual water from the pipes to prevent leaks during installation.

2. Inspect the Valve and Pipes

Before installation, carefully inspect the brass craft angle stop additional three-way valve and pipe interfaces to ensure there is no damage or debris. Although valves produced by Chinese faucet factories undergo strict quality control, it is still necessary to confirm their condition before installation. Also, check if the pipe interfaces are smooth and use a pipe cutter to trim them if needed.

3. Wrap Teflon Tape

To ensure the sealing of the threaded interface, wrap Teflon tape clockwise around the threaded part of the brass craft angle stop additional three-way valve. Typically, 3-5 layers are sufficient. Ensure the tape evenly covers the threads, avoiding excessive thickness or thin spots. The Teflon tape fills the thread gaps to prevent leaks.

4. Install the Valve

Align the threaded interface of the brass craft angle stop additional three-way valve with the pipe interface and rotate the valve clockwise by hand until it can no longer turn. Then, use a wrench to gently tighten the valve, being careful not to over-tighten, as this may damage the threads or the valve body. The valves from Chinese faucet factories are well-designed and only require proper tightening to achieve a good seal.

5. Connect Other Pipes

Connect other pipes or devices to the remaining interfaces of the brass craft angle stop additional three-way valve. Ensure each connection is tight and leak-free. If necessary, use Teflon tape or sealant to enhance the sealing effect.

6. Check for Leaks

After installation, turn on the water supply and check for leaks at all connections of the brass craft angle stop additional three-way valve. If leaks are found, turn off the water supply, rewrap the Teflon tape, and tighten the valve again. Ensure all connections are completely sealed before normal use.

7. Test Operation

The brass craft angle stop additional three-way valve is characterized by its ability to control each water flow with a 90-degree rotation. After installation, test the valve’s rotation to ensure it operates smoothly and can be easily opened and closed. Products from Chinese faucet factories are known for their high performance and smooth operation, but post-installation testing can further verify their functionality.

By following the above steps, you can successfully install the brass craft angle stop additional three-way valve and ensure its optimal performance in water supply systems. Chinese faucet factories will continue to provide high-quality products and professional installation solutions to meet the needs of global users.