The embedded concealed shower set gunmetal gray four functions is a premium integrated shower system that includes a large overhead shower, handheld sprayer, side massage jets, and waterfall outlet. Proper installation is essential to ensure functionality and durability. The following is a complete guide for setup.
-
Pre-Installation Considerations
Before installation, make sure the wall has sufficient depth to embed the system. It is recommended to install the concealed parts before wall tiles are applied. Water pressure should be stable between 0.3–0.5 MPa to ensure normal operation. Early planning ensures a seamless finish. -
Required Tools
Tools needed include a measuring tape, level, electric drill, wrench, screwdriver, sealing tape, waterproof sealant, and possibly a wall cutter for pipe slots. -
Preparation Steps
-
Carefully read the instruction manual and pipeline diagram;
-
Confirm wall slot dimensions match the concealed box;
-
Check that all parts are complete, including the mixer valve, spray heads, and connectors;
-
Turn off the water supply and clean the work area;
-
Mark installation positions using technical data provided by the Chinese faucet factory.
-
Standard Installation Procedure
-
Embed the thermostatic valve into the wall and level it correctly;
-
Connect hot and cold water pipes in the correct direction;
-
Install pipelines for the overhead, handheld, side jets, and waterfall outlet;
-
Seal the wall with waterproof materials after embedding;
-
After the wall is dry, install the control panel and all sprayers;
-
Adjust the spray angles to ensure optimal water coverage.
-
Testing and Inspection
After installation, run a full water test. Check for any leaks, ensure the thermostatic function works properly, water temperature is adjustable, and all outlets are operational. -
Common Issues and Solutions
-
Low water pressure may be due to pipe blockage or misalignment; clean the pipes or realign components;
-
Thermostat malfunction may stem from improper valve core installation or unstable pressure; recheck the setup;
-
Uneven control panel placement may require surface rework or wall correction.
-
Safety and Maintenance Tips
Clean filters regularly to avoid blockages. Avoid acidic cleaners on surfaces. If unused for extended periods, turn off the water inlet. Annual professional checks are recommended to ensure system longevity.
The embedded concealed shower set gunmetal gray four functions, manufactured by a Chinese faucet factory, features reliable performance and premium materials. It is well-suited for homes, hotels, and wellness centers. Proper installation will greatly enhance both comfort and product lifespan.
