Installation Guide for Polypropylene Threaded Angle Seat Valve Produced by Chinese Faucet Factory

The Polypropylene Threaded Angle Seat Valve, produced by a Chinese faucet factory, is widely used in industries such as chemical and pharmaceutical due to its excellent chemical stability and heat resistance. This article provides a detailed guide on how to properly install and maintain this valve to ensure its long-term stable operation.

1. Product Features

The Polypropylene Threaded Angle Seat Valve, manufactured by a Chinese faucet factory, is made from high-quality polypropylene material and has the following features:

1. Chemical Stability: Resistant to various corrosive media, suitable for chemical and pharmaceutical industries.
2. Heat Resistance: Maintains stable performance even in high-temperature environments.
3. Threaded Design: Easy to install and disassemble, suitable for various pipeline systems.

2. Installation Steps

1. Preparation: Before installation, ensure that the pipeline system is clean and free of impurities and dirt. Check the threaded parts of the valve and pipeline to ensure there is no damage.
2. Sealing Treatment: Use waterproof sealing tape or sealant on the threaded parts to ensure a tight seal. This is a crucial step to prevent leaks.
3. Installing the Valve: Align the threaded part of the Polypropylene Threaded Angle Seat Valve with the pipeline and tighten it by rotating clockwise. Be careful not to over-tighten, as this may damage the threads.
4. Checking the Seal: After installation, perform an initial check to ensure a good seal between the valve and the pipeline. A water pressure test can be used to verify this.

3. Maintenance Recommendations

1. Regular Inspection: Regularly inspect the valve core to ensure the seal is intact. Especially when in long-term contact with corrosive media, the valve core is prone to damage.
2. Cleaning and Maintenance: Regularly clean the valve to prevent the accumulation of impurities that could affect performance. Use mild detergents and soft cloths for cleaning.
3. Replacing Parts: If any damage is found in the valve core or other parts, replace them promptly to avoid performance degradation due to long-term exposure to corrosive media.

4. Precautions

1. Avoid Over-Tightening: During installation, avoid over-tightening the valve to prevent damage to the threads.
2. Use Appropriate Tools: Use appropriate tools for installation and disassembly to avoid damage caused by unsuitable tools.
3. Regular Maintenance: Perform regular maintenance and inspections to ensure the long