Introduction to the Advantages and Disadvantages of In-Wall Faucets Installation of In-Wall Faucets
Posted on November 21 2022
Many faucets in public places are wall-mounted faucets. The advantage of this type of faucet is that it saves space, and it is in the shape of automatic induction control. It does not need to be touched by hand, and it is more hygienic. It is relatively Complicated, users must understand the installation steps before installation. Next, let's take a look at the advantages and disadvantages of the in-wall faucet and the installation steps.
Advantages and disadvantages of wall-mounted faucets
- Intelligent water saving: it belongs to the automatic induction control switch. When using it, put the handle or the water container into the sensing range, the faucet will automatically discharge water, and stop the water discharge after it is disengaged. The water saving function is obvious.
- Save space. The purchase of wall-mounted faucets generally saves more space than ordinary faucets, and can also improve the decoration of the entire bathroom space, making the bathroom space more tidy.
3. Convenient for cleaning and cleaning: when in use, the switches are all automatically completed by sensors, and people do not need to touch the faucet, which is effective in preventing bacterial cross-infection.
4. Compared with ordinary faucets, the installation of in-wall faucets will be more complicated. Usually, it is best to ask a professional installer to install them, and the cost of in-wall faucets is relatively high. - The wall-mounted faucet needs to install many parts into the wall. If there is a problem during use, it will be very troublesome to repair.
In-wall faucet installation steps
- Before installation, please turn on the water source first, remove impurities, sand, etc. in the piping, and then turn off the water source. The main purpose is to prevent the faucet from being installed. If there are impurities in the water pipe and the water cannot be supplied normally, it will be very troublesome to rework the installation again.
- Lock the flange cover into the teeth of the water inlet elbow, then wrap the teeth with a leak-proof belt, lock it into the wall piping, adjust the cold and hot water inlet elbows, and rotate the angle until it is flush and the hole distance is the same as the body The distance between the hot and cold water inlet holes is the same, and then the flange cover is rotated to stick to the wall, mainly for the purpose of fixing.
- Put the rubber gasket into the connecting nut of the hot and cold water inlet of the body, and then connect and lock it with the hot and cold water inlet elbow. Please use a 30mm wrench. The surface of the product will affect the service life. After cleaning, wipe off the water droplets on the surface with a sponge.
Precautions for wall-mounted faucets
- Before installing the faucet, make sure that the water pressure is between 0.5-5kgf/cm, so as to ensure the normal water supply of the faucet after installation.
- Before disassembling the faucet body, please close the water inlet elbow (water source) and disassemble carefully to prevent damage to the faucet.
- Do not touch the water outlet when using the faucet to prevent burns.
- Do not disassemble the stuck shaft during the use of the wall-mounted faucet.
- When cleaning and maintaining the faucet, do not use corrosive cleaning agents to clean it, and avoid scrubbing with a vegetable cloth or decontamination powder, so as not to damage the surface of the product and affect the service life. After cleaning, wipe off the water droplets on the surface with a sponge .
Not only in public places, but some owners will also install wall-mounted faucets in their home bathrooms. This is not only convenient to use, but also has a sense of design and can play a decorative role. The above is the introduction of wall-mounted faucets.
YOROOW Sanitary Ware has been deeply engaged in the field of faucets for more than 12 years, and has its own R&D team and production factory, which can provide customers with OEM&ODM services. As one of the most professional faucet manufacturers in China, yoroow always insists on serving all customers with the most professional knowledge and attitude, and has also received a lot of praise from customers. If you have any needs for the faucet, please Contact Us, we will give you a reply within 24 hours and do our best to help you solve the problem.