Selection of plumbing hardware accessories such as faucets and hoses, triangular valves, etc.
Posted on February 17 2023
Most faucet materials are divided into stainless steel, zinc alloy and copper. Among them, the main body made of red punched copper is the best material. When choosing a faucet, you should pay critical attention to its appearance, and there are no burrs when you touch it. The surface coating of the faucet is galvanized, titanium-plated, spray-painted, etc. The thicker the coating is better, you can use your eyes to see whether the surface of the coating is bright or not. A good faucet has a thicker coating, which is not easy to fall off and oxidize.
Gently turn the handle of the faucet to check whether it is easy to move and whether there is a sense of stagnation or heaviness. It is better to see that the faucet switch is seamless, tight and unobstructed, and does not slip. Inferior quality has a large gap and a great sense of obstruction.
Knock on the main body of the faucet, whether the sound is dull, and carefully look at the faucet interface to see if it is a copper body. If the sound is loud and clear when knocking, it is not stainless steel, of course it is worse. Then look at the various parts of the faucet, mainly to see whether the assembly of the parts is precise. The valve body and handle of a good faucet are all made of brass, which is heavy in weight and dignified.
Check each part of the faucet to see if the assembly is precise and there is no looseness. Usually single-handle faucets are attached with assembly dimension drawings and instructions when they leave the factory. Before assembly and use, the product packaging inspection certificate, etc. should be lifted to avoid "three noes" products. If it is an imported product, you should pay special attention.
In addition, you should check whether the accessories are in good condition. Usually, the accessories should be equipped with: (1) a full set of strong bolts and strong copper sheets and gaskets; (2) a full set of lifting water remover; (3) two water inlet pipes. (4) Two triangular valves. When choosing hoses and triangular valves, you must pay attention to choosing good quality and guaranteed quality. Don’t underestimate these small accessories. Poor selection of accessories will often affect the overall service life. It is recommended to choose the faucet, hose and triangle valve produced by Fujian Yoroow Sanitary Ware Company.
YOROOW Sanitary Ware has been deeply engaged in the field of faucets for more than 12 years, and has its own R&D team and production factory, which can provide customers with OEM&ODM services. As one of the most professional faucet manufacturers in China, yoroow always insists on serving all customers with the most professional knowledge and attitude, and has also received a lot of praise from customers. If you have any needs for the faucet, please Contact Us, we will give you a reply within 24 hours and do our best to help you solve the problem.