Faucet Manufacturer |Phone:1376077078|Email:sales72@yoroow.com

What should I do if the kitchen faucet is blocked

Posted on May 29 2023

What should I do if the kitchen faucet is blocked?

What should I do if the kitchen faucet is blocked? Some people recommend installing a water-storing electric cooker under the sink, which can also save water resources. This is also a good way, but the installation of electric cooker needs to be done during the kitchen decoration. It is too troublesome to set up and install in the later stage. Choosing this solution is very inconvenient for the sudden blockage of the kitchen faucet. So what should I do for the sudden blockage? How does the faucet blockage form?

Step 1: In fact, the method of repairing the clogged faucet in the kitchen is very simple. You can easily solve the sudden situation of clogged faucet with your own hands. Generally, there is a connector that can be screwed on at the place where the faucet comes out. You only need to unscrew the connector gently in a counterclockwise direction (be careful not to use brute force to avoid damaging the faucet).


Step 2: Disassemble the unscrewed faucet interface further. The faucet interface generally has a small part of parts inside, and these small parts are the important reasons that affect the clogging of the kitchen faucet. What is the reason, of course, it needs to be unscrewed to see.

Step 3: Remove the 2 layers of iron sand net inside the faucet, and you will find that there are many tiny sand particles on the iron sand net. These tiny sand particles block the sand net and reduce the speed of water flow and the water output of the faucet. How to deal with these tiny sand particles? Generally, vinegar is used to soak the iron sand net with vinegar. After about an hour, a needle is used to pick out the larger sand particles, and then the surface of the iron sand net is exposed to flowing water. Flush to ensure that the finer sand particles inside can be washed away.


Step 4: After ensuring that the water outlet below is unobstructed, first put the green rubber pad underneath, screw the green rubber part, and then put the two layers of iron sand nets in order to complete the connection of the faucet Good stitching.

Step 5: After splicing the connector of the faucet, reinstall it on the faucet. At this time, turn on the switch of the kitchen faucet and you will find that the water flow of the faucet becomes larger and the faucet will no longer be blocked. The simple clogged faucet problem is solved in this way.

In addition to knowing the above 5 faucet repair operation steps, you must pay attention to the faucet when repairing the faucet. Don't overrun the screw of the faucet interface to avoid loosening of the thread. In this way, it may be necessary to ask a dedicated maintenance worker to fix the thread. .


What should I do if the kitchen faucet is blocked? Did you read the above 5 faucet repair operation steps? Does it feel easier? Do you never have to worry about the kitchen faucet again next time and don’t know what to do? It’s good! If you want to keep your home The kitchen faucet can always be kept unblocked. It is recommended that you must open the faucet regularly to remove the obstruction. Effective cleaning and maintenance can also extend the service life of the kitchen faucet.