How to install sanitary faucet
Posted on April 01 2022
When you buy Shower, bathtub and wall mounted sanitary faucet, you can choose the appropriate height to bury the outlet pipe. The distance between hot and cold water pipes must reach 15 cm. Before installation, you must not forget to flush the water pipe to avoid damage to the bathroom faucet due to the hard water quality.
I. single handle toilet faucet
When buying a single hand basin sanitary faucet, you should pay attention to the diameter of the water outlet. Now most of the market belongs to national standard products. You should also pay attention to the height of the reserved upper nozzle. 35 points from the basin down is the most appropriate. During installation, the special angle valve must be selected, and the angle valve must be fixed with the cold and hot water pipe of the wall outlet. When you find that there is a distance between the angle valve and the water supply pipe of the sanitary faucet, you can buy a special extension pipe of the sanitary faucet from the shopping store at that time. Remember, do not use other water pipes to connect, because if the water pressure is large, it is easy to fall off and leak, causing losses to you.
II. Shower, bathtub and bathroom faucet (wall mounted)
When you buy Shower, bathtub and wall mounted sanitary faucet, you can choose the appropriate height to bury the outlet pipe. The distance between hot and cold water pipes must reach 15 work points. Before installation, you must not forget to flush the water pipe to avoid damage to the bathroom faucet due to the hard water quality. If the elbow between the bathroom faucet and the wall joint is too long, cut off part of the 4-point wire. Remember: the 6-point connected with the bathroom faucet seems not to be cut randomly.
III. concealed shower, bathtub and bathroom faucet
After purchasing concealed sanitary faucet, the valve core of sanitary faucet shall be embedded in the wall. Pay attention to the thickness of toilet wall before embedding. If the wall is too thin, the valve core will not be embedded. When embedding, the plastic protective cover of the valve core shall not be removed easily to avoid damage to the valve core due to cement and other chores. In addition, pay attention to the up, down, left and right directions of the valve core when embedding the valve core, so as to avoid the wrong embedding of the valve core.
IV. constant temperature sanitary faucet
Before installing the constant temperature sanitary faucet, please check whether the water pipe is hot on the left and cold on the right. Remember not to connect the cold and hot water pipes wrong, so as to avoid the sanitary faucet from working normally. Thermostatic sanitary faucets cannot be used for gas and solar water heaters because the water pressure is too low. Please don't forget to install the cold and hot water filter screen when installing the constant temperature sanitary faucet.
V. shower
When you install shower, bathtub and bathroom faucets, don't forget the filter screen in the shower pipe when you need to install a shower. When installing the shower, the water pressure must not be too high. Generally, 3kg is the best, not more than 5kg. If the water pressure is too high, the water flow limiter in the valve core of the sanitary faucet can also be opened to reduce the water pressure and achieve the effect of water saving.