As high-end bathroom equipment, the concealed shower set gold is highly favored by high-end residences, star-rated hotels, and luxury clubs due to its luxurious and elegant appearance and excellent performance. These high-quality shower sets are meticulously crafted by Chinesische Wasserhahnfabriken, featuring not only exquisite designs but also stable and reliable performance. The following is a detailed installation guide to help you complete the installation smoothly.

(I) Vorsichtsmaßnahmen vor der Installation des Produkts
Before installation, carefully inspect all components of the concealed shower set gold to ensure there is no damage or missing parts. At the same time, confirm that the bathroom wall material is suitable for embedded installation. Load-bearing walls or solid brick walls are ideal choices. Additionally, understand the water pressure in your home to ensure it is within the applicable range of the product, so as not to affect the user experience.
(II) Erforderliche Installationswerkzeuge
During the installation process, you need to prepare tools such as an electric drill, wrench, level, tape measure, and Teflon tape. The electric drill is used to drill holes in the wall, the wrench tightens each component, the level ensures the levelness of the installation, the tape measure is used for precise measurement, and the Teflon tape is used to seal the joints to prevent water leakage.
(III) Vorbereitungsschritte vor der Installation
First, close the main water supply valve of your home and empty the remaining water in the pipes. Then, mark the installation positions of the pipes and the mixing valve on the wall according to the product manual. Be sure to measure accurately to ensure that the concealed shower set gold can be used normally after installation.
(IV) Standard-Installationsverfahren
Use an electric drill to drill holes in the wall according to the marked positions. Embed the pipes and the mixing valve into the wall and use a level to calibrate the position to ensure a horizontal installation. Next, connect the cold and hot water pipes and wrap Teflon tape to prevent water leakage. Install the gold showerhead, handheld showerhead, and control panel in their respective positions and secure them firmly.
(V) Key Points of Use Testing and Inspection
After the installation is complete, open the main water supply valve and check whether there is any water leakage at each joint. Test the water outlet of the large-sized overhead showerhead and the adjustable handheld showerhead to ensure stable water flow and that the multi-functional water outlet control valve and the thermostatic mixing system work normally. At the same time, check whether all functions of the control panel are normal.
(VI) Allgemeine Installationsprobleme und Lösungen
If there is a water leakage problem, it may be due to an improper seal at the joint. You can re-wrap the Teflon tape or replace the gasket. If the water flow is unstable, it may be caused by a water pressure problem or pipe blockage. You can contact a professional for inspection and handling.
(VII) Sicherheitstipps und Wartungsempfehlungen
During the installation and use process, ensure that the power supply is turned off to avoid the risk of electric shock. Regularly clean the surface of the gold-plated coating with a soft damp cloth. Avoid using corrosive cleaners to maintain its corrosion-resistant, oxidation-resistant, and scale-resistant properties, keeping the concealed shower set gold looking as good as new for a long time.
