Installation Guide for G3/4 Angle Valve

Introduction to G3/4 Angle Valve
The G3/4 angle valve is designed for 3/4-inch water pipe systems, widely used in household and industrial water supply pipelines. It effectively regulates water flow, ensuring a stable supply. Due to its larger interface size, the G3/4 angle valve is typically used in high water flow demand scenarios such as industrial facilities and large household installations. Common materials include brass and stainless steel, which can withstand high pressure and temperature. G3/4 angle valves manufactured by Chinesische Wasserhahnfabriken feature precise design and fine craftsmanship, ensuring stable performance over long-term use.

Installation Steps for G3/4 Angle Valve
1. Prepare the Necessary Tools
Before installing the G3/4 angle valve, prepare the following tools:

Wrench
PTFE tape (seal tape)
Screwdriver (if a mounting bracket is needed)
Pipe pliers
2. Turn Off the Water Supply
Before installation, be sure to shut off the main water valve to prevent water loss or damage.

3. Inspect the Pipe Interface
Ensure that the G3/4 threaded pipe interface is clean and free of impurities or rust. Any debris on the surface may affect the sealing performance.

4. Wrap PTFE Tape
To enhance the sealing of the G3/4 angle valve, wrap PTFE tape around the threaded section about 5-7 times to prevent leakage after tightening.

5. Install the G3/4 Angle Valve
Screw the G3/4 angle valve into the pipe interface by hand, then use a wrench to tighten it gently. Avoid excessive force to prevent damage to the threads.

6. Connect the Water Pipe
Depending on the installation requirements, connect the inlet pipe or hose to the other end of the G3/4 angle valve and secure it using a wrench.

7. Test for Leaks
Turn on the main water supply and slowly open the G3/4 angle valve to check for any leakage. If leakage occurs, increase the number of PTFE tape wraps or adjust the valve’s tightness.

Maintenance and Precautions
Regular Inspection: Over time, the sealing components of the G3/4 angle valve may age. Regularly check for leaks to ensure proper operation.
Avoid Over-Tightening: When installing or removing the valve, avoid excessive force to prevent thread damage.
Choose High-Quality Products: G3/4 angle valves manufactured by Chinesische Wasserhahnfabriken undergo strict quality control, offering excellent pressure resistance and corrosion resistance for long-term use.
The G3/4 angle valve plays a crucial role in water supply systems. Proper installation and maintenance ensure stable operation, improving the safety and longevity of the water system.