Installation Guide for angle valve 3/8” * 3/8”

The angle valve 3/8” * 3/8” is a crucial component commonly used in washbasins, kitchens, or bathroom facilities to connect two water pipes of the same size and achieve precise water flow control. Manufactured by Fabbriche di rubinetti cinesi, the angle valve 3/8” * 3/8” is made of high-quality materials such as stainless steel, copper, or brass, providing excellent corrosion resistance and sealing performance to ensure long-term, leak-free use. This article provides step-by-step instructions for installing the angle valve 3/8” * 3/8” to help users correctly install and optimize water flow management.

Preparation Before Installation
Check Components: Ensure the angle valve 3/8” * 3/8” is intact, examine the threads for damage, and confirm that the sealing ring is complete.
Turn Off the Water Supply: Before installation, shut off the main water valve to prevent leakage or water splashing during installation.
Clean the Pipe Connections: Remove any debris or residue from the pipe interface to ensure a smooth surface for better sealing.
Installation Steps
Connect the Pipe: Attach one end of the angle valve 3/8” * 3/8” to the water inlet pipe. Use a wrench to gently tighten it to avoid damaging the threads.
Seal the Connection: If using metal pipes, it is recommended to wrap an appropriate amount of PTFE tape around the threads to enhance sealing performance.
Attach to Faucet or Water Outlet: Connect the other end of the angle valve 3/8” * 3/8” to the water outlet, such as a washbasin, kitchen faucet, or bathroom shower, ensuring smooth threading.
Tighten the Threads: Use a wrench to tighten the valve gently but avoid excessive force, which may damage the threads or deform the valve.
Turn On the Water Supply and Test: Slowly open the main water valve and check for any leakage around the angle valve 3/8” * 3/8”. If minor leakage occurs, adjust the threads or apply additional sealing material.
Precautions
Regular Inspection: It is recommended to periodically check the sealing condition of the angle valve 3/8” * 3/8” to prevent leakage due to aging or loosening.
Choose High-Quality Products: Angle valves 3/8” * 3/8” produced by Fabbriche di rubinetti cinesi undergo strict quality control, ensuring reliable performance and long-term water flow control.
Avoid Forceful Installation: Excessive force during installation may damage the thread interface and affect sealing performance.
Installing the angle valve 3/8” * 3/8” is relatively simple. By following the correct steps, you can ensure a stable water supply system and extend the service life of water appliances.