Enjoying a natural bath in the garden or having a refreshing rinse by the pool, outdoor concealed shower sets are becoming essential facilities in more and more outdoor spaces, thanks to their clean and beautiful design and convenient, practical functions. This shower system, specially designed for outdoor environments, embeds pipes and mixing valves into walls or the ground, leaving only the showerhead and control panel exposed, saving space while exuding a modern aesthetic. However, due to the complex outdoor environment, its installation process requires professional and meticulous operation. The outdoor concealed shower sets produced by Chinese kraanfabrieken strictly adhere to international weather resistance standards. They can operate stably in all kinds of weather, from severe cold to intense heat, and offer a variety of installation methods to meet the needs of different outdoor scenarios. The following will introduce the entire installation process in detail.
(I) Voorzorgsmaatregelen voor installatie van het product
Before installation, a thorough understanding of the environment and the product is fundamental. First, confirm that the wall or ground at the installation location has sufficient load-bearing capacity and structural strength. For example, load-bearing walls or thick concrete bases are more suitable for embedding pipes and valve bodies. Second, consider local climate conditions. In coastal areas with high salt content in sea breezes, pay special attention to the product’s corrosion resistance; in cold northern regions, focus on anti-freezing measures. The outdoor concealed shower sets produced by Chinese faucet factories are made of high-quality stainless steel, brass, or anti-corrosion PPR materials and are treated for rust prevention, UV resistance, and moisture protection, effectively coping with various harsh environments. In addition, determine the direction of cold and hot water supply pipes in advance to ensure they match the product’s installation layout and avoid pipe conflicts.
(II) Vereist installatiegereedschap
To do a good job, one must first sharpen one’s tools. Installing an outdoor concealed shower set requires a series of professional tools. Basic tools include an electric drill and an impact drill for making holes in walls or the ground; a spirit level to ensure the installed components are horizontal and vertical; wrenches and pipe wrenches for tightening pipe fittings and valves; a tape measure for precise positioning; PTFE tape and sealant, which play a crucial role in sealing and preventing leaks. If the product is equipped with an intelligent control panel, prepare electronic installation tools such as screwdrivers and electrical tape. Additionally, to protect the surrounding environment during installation, it is advisable to prepare protective pads and cleaning tools.
(III) Voorbereidingsstappen vóór installatie
Pre-installation preparation is of great significance. The first step is to turn off the main water valve and open all faucets to drain the remaining water in the pipes, preventing water leakage during installation. The second step is to carefully study the product installation drawings and mark the installation positions of pipes, mixing valves, showerheads, and control panels on the wall or ground according to actual needs. The markings must be precise. The third step is to inventory product accessories, including overhead showerheads, handheld showerheads, cold and hot water mixing valves, control panels, connecting pipes, etc., to ensure they are complete and undamaged. If any problems are found, contact the after-sales service of the Chinese faucet factory for replacement in a timely manner. The fourth step is to thoroughly clean the installation area, removing dust and debris to ensure a flat and clean installation surface for subsequent work.
(IV) Standaard installatieproces
The standard installation process can be divided into three main stages. First is pipe embedding. Use an electric drill and an impact drill to make holes according to the marked positions and embed anti-corrosion pipes into the wall or ground. Pay attention to maintaining the slope of the pipes for smooth drainage. Then comes component installation. Fix the mixing valve in the preset position, connect the cold and hot water pipes with a wrench, and wrap PTFE tape to enhance sealing. Install the showerhead bracket and control panel, and calibrate them with a spirit level to ensure firm installation and accurate positioning. Finally, connect the overhead showerhead and handheld showerhead to the pipes. Check whether all connection parts are tightened to ensure there is no looseness or leakage.
(V) Gebruikstests en inspectie Belangrijke punten
After installation, a comprehensive usage test is essential. Open the main water valve, slowly open the mixing valve, and observe whether the water flow is smooth. Check for any water leakage at pipe joints, mixing valve connections, showerhead interfaces, and other parts. Test the cold and hot water adjustment function to ensure stable temperature regulation. For high-end models with a thermostatic function, focus on checking the thermostatic effect. At the same time, check whether all functions of the control panel are normal, such as button response and display clarity. Once any abnormalities are found, immediately close the water valve for investigation and repair.
(VI) Vaak voorkomende installatieproblemen en oplossingen
Some common problems may occur during installation. For example, if there is a pipe leak, it may be due to poor sealing. You can re-wrap PTFE tape or apply sealant for reinforcement. If the water flow is too small, it may be caused by pipe blockage or an incompletely opened valve. Clean the pipe debris and check the valve status. When the control panel malfunctions, it may be due to incorrect wiring connections. Recheck the wiring according to the instructions. The Chinese faucet factory provides a professional technical support team. If you encounter problems that cannot be solved, feel free to contact them for assistance.
(VII) Veiligheidstips en onderhoudssuggesties
Safe use and regular maintenance are the keys to extending the service life of outdoor concealed shower sets. Ensure power-off operation during installation to avoid the risk of electric shock. Avoid using outdoor showers during thunderstorms to prevent lightning strikes. In daily use, clean the showerhead nozzles once a month to prevent scale blockage. Check the pipe connections and sealing parts every quarter. If any aging or damage is found, replace them in a timely manner. Before winter arrives in cold regions, drain the water in the pipes to prevent freezing and cracking. The outdoor concealed shower sets produced by Chinese faucet factories come with a 1 – 3-year warranty period, giving you peace of mind.
Through the above scientific and standardized installation and maintenance, the outdoor concealed shower sets of Chinese faucet factories will bring a comfortable and convenient bathing experience to your outdoor space. If you have any installation questions, feel free to contact us for professional guidance.
