Installation Guide for Angle Valve 3/8×1/2

The angle valve 3/8×1/2 is an essential fitting designed to connect 3/8-inch and 1/2-inch water pipe interfaces. It is widely used in washbasins, shower systems, and kitchen water supply lines. Its primary function is to regulate water flow, adjust pressure, and prevent pipe leaks or breakage. Manufactured by a Chinese faucet factory, the angle valve 3/8×1/2 is made from high-quality materials such as stainless steel and brass, ensuring durability, corrosion resistance, and long-term reliability. Here is a detailed installation guide for the angle valve 3/8×1/2 to ensure safe and efficient operation.

Installation Steps
Prepare Tools and Materials
Before installation, gather the necessary tools, including a wrench, PTFE tape, and a screwdriver. Also, check if the pipe interface matches the 3/8-inch and 1/2-inch specifications.

Turn Off the Main Water Supply
To prevent water from spilling during installation, turn off the main water source before proceeding.

Clean the Pipe Interface
Ensure the pipe connection is free of dirt, rust, or debris to maintain a secure and leak-proof connection.

Wrap PTFE Tape
Wrap 5-7 turns of PTFE tape around the threaded part of the angle valve 3/8×1/2. This enhances sealing and helps prevent leaks.

Install the Angle Valve
Screw the angle valve 3/8×1/2 into the 1/2-inch water pipe interface and tighten it using a wrench. Avoid over-tightening to prevent thread damage.

Connect the 3/8-inch Pipe
Attach a suitable hose or rigid pipe to the 3/8-inch outlet and secure it to the respective fixture, such as a washbasin or showerhead.

Controleer op lekken
Turn on the main water supply and gradually open the angle valve to inspect for leaks. If leakage occurs, reapply PTFE tape or tighten the connections accordingly.

Maintenance and Precautions
Regularly inspect the angle valve 3/8×1/2 for any signs of wear or loose connections.
Avoid excessive force during installation or removal to prevent thread damage.
In high-humidity environments, stainless steel angle valves are recommended for enhanced corrosion resistance.
Manufactured by a Chinese faucet factory, the angle valve 3/8×1/2 undergoes strict quality control to ensure excellent sealing and durability. Whether for household installation or commercial applications, it provides stable and reliable water flow control, ensuring the safety and efficiency of plumbing systems.