The concealed shower set chrome has become a popular choice for modern residential, hotel, and commercial bathrooms due to its sleek and stylish appearance and practical functions. Its concealed installation method cleverly embeds the pipes and mixing valve body into the wall, only exposing the chrome-plated showerhead, handheld spray, and control panel. This not only saves space but also makes the overall style of the bathroom look more high-end and elegant. The concealed shower set chrome produced by Китайские заводы по производству смесителей uses high-quality brass or stainless steel materials and undergoes multiple layers of chrome plating processes, performing excellently in terms of durability and rust resistance while meeting the aesthetic requirements of modern homes. However, to install this shower system perfectly, you need to master the following key points.
I Precautions Before Product Installation
Before installing the concealed shower set chrome, first, confirm whether the structure of the bathroom wall is suitable for concealed installation. The wall needs to have sufficient thickness to accommodate the pipes and valve body, and generally, it is recommended that the wall thickness is not less than 12 centimeters. Secondly, carefully check whether all product accessories are complete, including large-sized overhead showerheads, adjustable handheld showerheads, multi-functional water outlet control valves, thermostatic mixing systems, and other components, to avoid affecting the installation progress due to missing accessories. In addition, it is necessary to understand the water pressure in your home. Usually, the applicable water pressure range for this shower set is between 0.1 – 0.5MPa. Too high or too low water pressure may affect the usage effect.
II Необходимые инструменты для установки
To install the concealed shower set chrome, professional tools need to be prepared, mainly including an electric drill, level, wrench, Teflon tape, tape measure, pipe wrench, etc. The electric drill is used to drill holes in the wall, the level ensures the horizontal installation, the wrench and pipe wrench are used to tighten the pipe joints, the Teflon tape plays a role in sealing and preventing leakage, and the tape measure is used to accurately measure the installation position and size.
III Preparation Steps Before Installation
First, turn off the main water valve at home to avoid water leakage during the installation process. Then, according to the product manual and the actual layout of the bathroom, use a tape measure and a pencil to mark the installation positions of the pipes and valve body on the wall to ensure accurate positioning. Next, use an electric drill to drill holes at the marked positions, and the drilling depth and diameter need to match the product installation requirements. Finally, pre-assemble the pipes and valve body according to the design requirements to prepare for the formal installation.
IV Стандартный процесс установки
Embed the pre-assembled pipes and valve body into the reserved holes in the wall, use a level for calibration to ensure that the valve body is in a horizontal state, and then fix it with expansion screws. When connecting the cold and hot water pipes, pay attention to distinguish the cold and hot water interfaces. Usually, the left side is for hot water, and the right side is for cold water, and wrap Teflon tape to prevent leakage. Install the fixing brackets for the overhead showerhead and handheld spray, and also use a level for calibration to ensure firm installation and proper positioning. Finally, install the overhead showerhead, handheld spray, and control panel onto the corresponding brackets in turn to complete the installation of the entire shower system.
V Usage Testing and Inspection Key Points
After the installation is completed, open the main water valve and check whether there is any water leakage at each joint. If there is water leakage, turn off the water valve and tighten the joint again or add more Teflon tape. Test the water temperature adjustment function of the thermostatic mixing system to ensure that the water temperature can be stabilized within the set range. At the same time, test the water outlet effect of the overhead showerhead and handheld spray to check whether the water flow is uniform and there is no blockage.
VI Общие проблемы установки и их решения
If there is insufficient water pressure after installation, it may be due to pipe blockage or the valve not being fully opened. You can check and clean the pipes and ensure that all valves are fully open. If the water temperature adjustment is not sensitive, it may be a problem with the thermostatic valve core, and you need to contact a professional maintenance personnel for inspection and replacement.
VII Советы по безопасности и рекомендации по обслуживанию
During the installation and use process, be sure to avoid live operations to prevent the risk of electric shock. Regularly clean the water stains and dirt on the chrome-plated surface, and wipe it with a soft cloth and a neutral cleaner to keep it shiny. Check the pipe joints and valves regularly to prevent loosening and water leakage.
Through the above steps and key points, I believe you can successfully complete the installation of the concealed shower set chrome. Choosing high-quality products produced by Chinese faucet factories and following the correct installation and maintenance methods will bring you a long-lasting and comfortable bathing experience.
