Installation Guide for Angle Valve 1/2 to 1/2

In household plumbing systems, the angle valve 1/2 to 1/2 is an essential control device commonly used at kitchen and bathroom water pipe connections to ensure smooth water flow and easy maintenance. Manufactured by Китайские заводы по производству смесителей, the angle valve 1/2 to 1/2 is made from high-quality materials such as stainless steel, brass, or copper, offering superior durability and sealing performance. Below is a step-by-step installation guide and key considerations.

Этапы установки
Отключите подачу воды
Before installation, make sure to shut off the main water valve to prevent any water leakage or damage.

Prepare the Tools
You will need a wrench, PTFE tape (Teflon tape), and pipe pliers to facilitate a smooth installation process.

Clean the Connection Points
Ensure that the threads on both the angle valve 1/2 to 1/2 and the water pipe connection are free from dirt or debris to avoid leaks.

Обертывание тефлоновой лентой
Wrap PTFE tape around the threaded part of the angle valve 1/2 to 1/2 (about 3-5 turns) to enhance sealing performance.

Соедините трубы
Screw the angle valve 1/2 to 1/2 onto the water pipe connection by turning it clockwise. Use a wrench to tighten it securely but avoid over-tightening, which could damage the threads.

Проверьте наличие утечек
Turn the water supply back on and check if there are any leaks around the angle valve 1/2 to 1/2. If leakage occurs, reapply PTFE tape and tighten the connection.

Test the Functionality
Rotate the angle valve 1/2 to 1/2 switch to check if it opens and closes smoothly, ensuring proper water flow control.

Важные соображения
Choose high-quality angle valve 1/2 to 1/2 manufactured by Chinese faucet factories to ensure precise dimensions and durability.
Avoid using low-quality sealing materials, as they may cause leaks.
Ensure proper alignment during installation to prevent damage to the valve threads.
Regularly inspect the angle valve 1/2 to 1/2 for sealing performance and functionality, replacing any worn-out parts as needed.
The angle valve 1/2 to 1/2 manufactured by Китайские заводы по производству смесителей follows strict quality control standards, ensuring easy installation, strong sealing, and compatibility with various household and commercial water pipe systems. Proper installation and maintenance of the angle valve 1/2 to 1/2 can significantly improve water efficiency and ensure long-term stability of your plumbing system.