Руководство по установке углового крана с латунным шаром

The Brass Ball Angle Valve, also known as the brass spherical angle valve, is a crucial component widely used in household and commercial building water pipe systems. Made from brass, it offers excellent corrosion resistance and durability, capable of withstanding high water pressure, making it a popular choice in various plumbing systems. Brass Ball Angle Valves produced by Китайские заводы по производству смесителей are not only suitable for high-frequency use but also ensure long-term stable performance. This article will provide a detailed guide on the installation steps and precautions for Brass Ball Angle Valves.

1. Подготовка

Before installing the Brass Ball Angle Valve, it is essential to gather the necessary tools and materials. Common tools include wrenches, screwdrivers, and pipe cutters. Additionally, ensure that the piping system is clean to prevent any debris from entering the valve and affecting its operation.

2. Shut Off the Water Supply

During the installation process, always shut off the water supply to prevent water flow from causing installation difficulties or damaging the valve. After shutting off the water, open the faucet to release any residual water pressure in the pipes.

3. Cutting the Pipe

Using a pipe cutter, cut the pipe to the appropriate length based on the dimensions of the Brass Ball Angle Valve. Ensure that the cut is smooth and free from burrs or deformations to allow the valve to be installed smoothly.

4. Installing the Valve

Align the Brass Ball Angle Valve’s interface with the pipe and tighten it using a wrench. While tightening, apply moderate force to avoid damaging the valve. Also, ensure that the valve’s sealing ring is correctly installed to maintain its sealing performance.

5. Checking for Leaks

After installation, turn on the water supply and check for any leaks around the Brass Ball Angle Valve. If leaks are detected, adjust the tightness of the valve or inspect the sealing ring for proper installation.

6. Testing Performance

Finally, test the Brass Ball Angle Valve’s flow control precision and sealing performance by adjusting its handle. Ensure that the valve can open and close smoothly and maintain a good seal under different water pressures.

Заключение

Although the installation of a Brass Ball Angle Valve may seem straightforward, each step requires careful execution to ensure its long-term stable performance. Brass Ball Angle Valves produced by Китайские заводы по производству смесителей, with their superior materials and craftsmanship, can meet the needs of various plumbing systems. With proper installation and maintenance, the Brass Ball Angle Valve will provide a reliable water flow control solution for your home or commercial building.